used machinery

  • SOLD!!!

  • Accu-Systems OCS Optimizing Crosscut Saw equipped with; 16' infeed, 12" width capacity x 2" thickness, 10HP main saw arbor motor, Tilt bed design, 15" color touchscreen, dual loop servo controlled pusher with clamp, servo saw stroke, "value based optimisation", accuracy +/- 1/64". Reads length of material, readsd defects via crayon marking, optimizes the cutting solution, positions material, clamps parts to pusher. Including width measuring. Good working condition

  • SOLD!!!

    Altendorf F-90 Sliding Table Saw 10 ½’ 126" (3,200 mm) Cutting length, 7.5 HP main motor, 18" dia. main blade cap. (when using scoring blade), 30mm dia. arbor; 1 HP scoring motor, 4-3/4" dia. scoring blade, 22 mm dia. Arbor, 49" Rip cap., 4-1/8" max. depth of cut, manual raise-and-lower of saw blade, (4) Cutting speeds of 3,500 - 4,000 - 5,000 & 6,000 RPM via step pulley; (2) swing-stops for crosscut fence. Including overhead blade guard, 33" x 28" auxiliary table, all guards & fences, sliding table lock mechanism; (2) dust outlets (120 mm in dia.)

  • Ayen DB1000 K23 32mm Dowel Construction Boring machine equipped with 23 spindle boring head with vertical and horizontal position and including positive drop st 45 degree. Right and Left fences with flip over stops for panel positioning. Drop down back fence for through feed positioning. Top down boring head for highest accuracy of boring.

  • Barr-Mullin Wonder Saw, 1995 machine in good working condition

  • Bectold SPR51 51" Pinch Rollerequipped with 1/2HP 115/220/1 US Motor Varidrive, 8" diameter upper & lower rolls, lower roll with 4" wide adjustable segments, upper & lower rolls air activated up & down, 6-1/4" opening, forward-reverse controls, wired 230 volt 1 phase (can be changed to 115 volt. Manual adjustment opening. Machine in very good condition

  • SOLD!!!

    Black Bros 62" top & bottom panel cleaner

  • SOLD!!!

    Castle TSM-20 Pocket Cutting Machine. Used pocket hole machine features a 15 in. x 31 in. table and pneumatic hold-down clamp. Additional features include a foot pedal activation. and enclosed steel stand.

  • SOLD!!!

    Cemco model 2137 37" Wide capacity, 6" Maximum thickness capacity, Single combination head with 5" diameter contact drum and 3" wide polishing platen, 20 HP Main drive motor DMD, 37" x 75" Abrasive belt size, Variable speed feed 15 to 60 FPM, Electric eye tracking, Manual raise and lower of table, Spring loaded holddown rollers, Load meter. (1) 6" Diameter dust outlet, Voltage: 230/60/3 phase.   

  • Delta 50-900 Series Dust Collector. 2 stage dust collection system, 3 hp, 1780 cfm, 230 or 460 3 phase. Motors are fan cooled and enclosed. Comes with 3 collections barrels.

  • Evan's model 0257 62" Pinch roller with solid top and bottom rollers, 4" max opening, front and rear safety gates, air cylinder pressure, set of spacers included. Very good condition

  • Evan's Machinery model 4253 Index Table with 5' x 12' capacity, including roller section between panel support rails, rails equipped with beveled rollers to transport panel to end stop. End stop with bump switch to activate panel drop. Panel is driven to end stop with powered drive roller. Machine in very good condition.Evan's Machinery model 4253 Index Table with 5' x 12' capacity, including roller section between panel support rails, rails equipped with beveled rollers to transport panel to end stop. End stop with bump switch to activate panel drop. Panel is driven to end stop with powered drive roller. Machine in very good condition.

  • Used Grass Drawer Box Boring Machine Eco Press P. machine no. 9708312. 60 Hz. 1997 machine.  Recently tested and working.

  • SOLD!!!

    Hess Casey Case Clamp equipped with motorized horizontal pressure beam with (3) vertical dual cylinder clamp pad, with vertical beam, (3) horizontal dual cylinder clamp pads, beam locks in position with pneumatic cylinders. 48" H x 100" L capacity. Clamp has been equipped with after-market dual palm controls. Good condition

  • Hess Standard Case Clamp, 60" x 100" opening capacity, (3) vertical dual cylinder clamping aggregates height adjustable with ratchet handle for quick adjustment, (2) horizontal dual cylinder clamp pads, top is counter balanced for vertical adjustment - mounted on vertical beam with roller bearing supports and pneumatic pin locks top & bottom. Independent pressure controls for horizontal and vertical clamp actuation. Good working condition

  • SOLD!!!

    HolzHer 1310-1 Edge Bander, with Cartridge Style Glue System, 3 Roller Pressure System, Heavy Duty Guillotine for thick PVC, Easy to use PLC with Program Storage. Single Motor End Trimming, Top & Bottom EdgeTrim, Top & Bottom Profile Scrapers, and Top & Bottom Buffing.


  • SOLD!!!

    The Kval,  DL-2A Automated Door Lite Cut-Out System: This machine is equipped with an 11ph Perske Hi-Frequency motor and includes the “X” & “Y” locking clamps. The operator positions a door in the machine, activates the clamp, then pushes the start sequence button. The machine then automatically travels around the rectangular cutting path. During the lite cutting cycle, the cutter bit oscillates up and down to maximize bit life. Cutout sizes are easily changed by moving the “X” and “Y” stop locks. Three-Phase Voltage440/460 Air CFM4 CFM @ 90 PSI

  • Mereen Johnson 424 Multiple Rip Saw model 424-DC/SR2, Specifications; 24” wide capacity, feed speed 225 FPM, rip capacity, 18,000 Bd.Ft. per 10 hours shift average.The motor was rebuild 100% in 2017, and all the Timken precision high speed bearings were changed in 2017. A new arbor was put in the machine in 2015, The feed chain is still in excellent shape, still rips perfectly straight. Everything on the saw has been maintained in excellent shape. Added an upgraded raise and lower mechanism for the press rolls which is much better than the original design. Soft start was added in the control cabinet for the 75 hp main arbor motor, in 2015. Including powered infeed pinch roll assembly that is installed on the front of the saw. Control cabinet for the saw, and moving blades; complete with all servo drives, soft starter, industrial computer, everything needed to operate the saw and moving blades. Cables connecting the control cabinet to the saw, Outfeed belt conveyor, 29” wide x 24’ long, complete with motor/drive, conveyor belt, and pinch roller, The buyer would need to buy a scanner, possibly from Ultimizers, or Mereen-Johnson and the infeed conveyors the complete the system


  • Miller Moorhead model 100 10" Laminate Slitter with 10" width capacity, including adjustable fence; forward/reverse drive. Good condition

  • 2007 Morbidelli 636 Top CNC Nested Based CNC, Flat table (aluminum matrix) 5' x 12' Working area with 11" in Z-axis (2) Becker VTLF 250 vacuum pumps 12-position traveling tool changer (Rapid 12) 15HP Spindle; 900 to 18,000 RPM HSK 63 Boring unit: (18) spindles - (12 vertical and 6 horizontal) (8) Independent vertical spindles in the X-axis and (5) independent vertical spindles in the Y-axis (4) Independent horizontal spindles in the X-axis and (2) independent horizontal in the Y-axis Free-standing control cabinet with PC, keyboard and monitor Pendant handheld control NUM 1040 CNC PC based controller with Xilog III, Windows operating system 2007 machine in excellent condition, well maintained.