Free
| /
DUSTKOP FTP Series Positive Pressure Enclosureless Dust Collectors
AGET DUSTKOP FTP Series enclosureless dust collectors offer an effective and practical solution to many woodworking and other nuisance dust problems created from various manufacturing processes. This line of products provides an affordable dust collector that will effectively capture and remove dust particles from contaminated airstreams. The dust laden air is conveyed to the collector by the integral system fan and then filtered through fabric tube filter media. Captured dust is collected beneath the bag plenum in easily connected disposable waste bags. Woven fabric filter media yields an extremely high filtration efficiency, and is intermittently reconditioned by the integral shaker mechanism, operated either manually or automatically, when the fan is off-line. AGET’s enclosureless dust collector design is compliant as an indoor enclosureless dust collector per NFPA 654 and NFPA 664. The FTP Series dust collector offers quick and easy installation and start-up, a small indoor footprint, and quiet operation. AGET’s FTP Series results in improved air quality and provides a safer working environment by removing dust particles from manufacturing operations and allowing clean, filtered air to be exhausted back into the work area. DUSTKOP enclosureless dust collectors offer a lower cost up-front investment, reduced maintenance costs and improved facility cleanliness. AGET has proudly manufactured DUSTKOP equipment in the USA since 1938.
STANDARD FEATURES
- Heavy gauge sheet metal fan housing and bag plenum
- Industrial-grade material handling steel fan wheel
- High efficiency woven fabric filter material
- Standard 5” diameter cotton sateen filter tubes
- Positive sealing snap-ring cuff filter tubes
- Standard shaker mechanism (manual or motorized)
- Component bolt-together design and construction
- Supporting structural steel unit frame
- Weather resistant powder coated finish
- Heavy duty industrial grade construction
Capacity range: 1,200 – 5,000 CFM (CFM dictated by dust)
Common applications: Woodworking, paper and particle board, plastics, composite material, etc.
|
Standard Specifications |
|||||||
|
Model |
Fan Motor |
CFM Range |
ESP Range |
Filter Tubes |
Filter Area |
Shaker Motor* |
Shipping Weight |
|
FT136P5-B2 |
5 HP |
1,200 – 3,000 |
11.2” – 6.3” |
36 |
257 sq. ft. |
½ HP |
895 lbs. |
|
FT148P7-B2 |
7 ½ HP |
1,500 – 3,800 |
11.2” – 6.2” |
48 |
343 sq. ft. |
½ HP |
950 lbs. |
|
FT160P10-B3 |
10 HP |
2,300 – 5,000 |
11.2” – 7.7” |
60 |
429 sq. ft. |
¾ HP |
1,010 lbs. |
|
FT172P15-B3 |
15 HP |
3,000 – 5,000 |
11.2” – 9.8” |
72 |
515 sq. ft. |
¾ HP |
1,080 lbs. |
* Motorized Filter Shaker is optional on all models
|
Standard Dimensions |
||||
|
Model |
A |
B* |
C |
D (Inlet Dia.) |
|
FT136P5-B2 |
50” |
107” |
120” |
10” |
|
FT148P7-B2 |
50” |
107” |
120” |
12” |
|
FT160P10-B3 |
50” |
125” |
122” |
14” |
|
FT172P15-B3 |
50” |
125” |
122” |
14” |
|
* Note: optional Motor shaker adds 10” to ‘B’ dimension
FILTER MATERIAL OPTIONS
Notes: A Flame retardant treatment available B Ground wire addition available DUST STORAGE ARRANGEMENTS
OPTIONAL FEATURES
Magnehelic differential pressure gauge NFPA Compliance Considerations: For AGET FTP Series enclosureless dust collectors to be compliant with NFPA standards, the following items must be adhered to:
Note: Additional requirements may apply to meet NFPA 654 standards for dusts other than wood dust. |
||||
